|
E5AF Fuzzy Temperature Controls 1/4 DIN Controller combines FUZZY and PID Controls for fast
response to process disturbances.
Features - Advanced PID control provides optimal response during start-up and steady-state operation
- Fuzzy and PID control work together to correct a process upset quickly, with minimal overshoot
- Fuzzy parameters can be changed to adjust Fuzzy control�s impact on the process
- Accuracy to
� 0.3% of set value - Field-selectable temperature ranges,
�F/�C scaling, and sensor input types - Plug-in outputs for field interchangeability
- Communications function and heater burnout alarm models available
3-Year warranty
| 
|
Specifications Order one control output separately below. For example, E5AF-A02-F with E53-S SSR output unit. For heater burnout models, be sure to order a current transformer. To order models marked for degrees Celsius, omit the "F" at the end of the part number.
Communication type | Standard | Heater burnout type * | None | E5AF-A-F | E5AF-AH-F | RS-232C | E5AF-A01-F | E5AF-AH01-F | RS422 | E5AF-A02-F | E5AF-AH02-F | RS485 | E5AF-A03-F | E5AF-AH03-F | BCD | E5AF-A20-F | E5AF-AH20-F | Transmission output(4-20mA) | E5AF-AF-F | E5AF-AHF-F | * Current Output E53-C may not be used with heater burnout type controllers. |
CONTROL OUTPUT UNITS | Output type | Relay output * | SSR output | Voltage output (for driving SSR) | Current | 12 VDC (NPN) | 24VDC (NPN) | 24VDC (PNP) | output | Part number | E53-R | E53-S | E53-Q | E53-Q3 | E53-Q4 | E53-C |
CURRENT TRANSFORMERS FOR HEATER-BURNOUT CONTROLLERS | Hole diameter | 5.8 mm (0.23in) | 12.0 mm (0.47 in) | Part number | E54-CT1 | E54-CT3 |
TEMPERATURE RANGES | Input type (switch selectable) | Thermocouple | Platinum RTD | Type K | Type J/L | Type T/U | Type E | Type R | Type S | 100 W | Temperature | �C | -200 to 1,300 | -100 to 850 | -200 to 400 | 0 to 600 | 0 to 1,700 | 0 to 1,700 | -99.9 to 450.0 | range | �F | 0399 to 2,300 | -100 to 1,500 | -300 to 700 | 0 to 1,100 | 0 to 3,000 | 0 to 3,000 | -99.0 to 800.0 | Unit of measure | 1�C or F, main setting and alarm | 0.1�C or F, main setting and alarm |
* Note: If control period is less than 5 seconds, use solid state relay or voltage relay. Detail instruction manual can be supplied if needed.
|
