|
E5EF Fuzzy Temperature Controls 1/8 DIN Controller combine FRZZY and PID control for fast response to process disturbances.  Features Advanced PID control for optimal response during start-up and steady-state operation FUZZY and PID control work together to correct a process upset quickly, with minimal overshoot FUZZY parameters can be changed to adjust fuzzy control�s impact on the process Accuracy to � 0.3% of set value Field-selectable temperature ranges, � F/� C scaling, and sensor input types Plug-in outputs for field interchangeability Communications function, heater burnout alarm and 8-bank model available 3-year warranty Specifications Order one control output separately below. For example, E5EF-A02TC-F with E53-S SSR output unit. For heater burnout models, be sure to order a current transformer. To order models marked for degrees Celsius, omit the "F" at the end of the part number. Controller type | Standard | Heater burnout type * | Input type | Thermocouple(10 types) | Platinum RTD | Thermocouple (10 types) | Platinum RTD | No communications | E5EF-ATC-F | E5EF-AP-F | E5EF-AHTC-F | E5EF-AHP-F | RS-422 communications | E5EF-A02TC-F | E5EF-A02P-F | E5EF-AHO2TC-F | E5EF-AH02P-F | RS-485 communications | E5EF-A03TC-F | E5EF-A03P-F | E5EF-AH03TC-F | E5EF-AH03P-F | 8-bank program memory | E5EF-BATC-F | E5EF-BAP-F | E5EF-BAHTC-F | E5EF-BAHP-F |
* Current Output E53-C may not be used with heater burnout type controllers. TEMPERATURE RANGES | Sensor input type | Thermocouple | | Type K | Type J/L | Type T/U | Type E | Type R/S | Type B | Type N | Temperature | � C | -200 to 1,300 | -100 to 850 | -200 to 400 | 0 to 600 | 0 to 1,700 | 100 to 1,800 | 0 to 1,300 | range | � F | -300 to 2,300 | -100 to 1,500 | -300 to 700 | 0 to 1,100 | 0 to 3,000 | 300 to 3,200 | 0 to 2,300 | Unit of measure | 1 � C or F, main setting and alarm | Sensor input type | Platinum RTD (Pt100 or JPt100) | Temperature | � C | -99.9 to 450.0 | range | � F | -99.9 to 800.0 | Unit of measure | 0.1 � C or F, main setting and alarm |
CONTROL OUTPUT UNITS | Output type | Relay | SSR | Voltage output (for driving SSR) | Current | | output * | output | 12 VDC (NPN) | 24 VDC (NPN) | 24 VDC (PNP) | output | Part number | E53-R | E53-S | E53-Q | E53-Q3 | E53-Q4 | E53-C |
CURRENT TRANSFORMERS FOR HEATER-BURNOUT CONTROLLERS | Hole DIAMETER | 5.8 mm (0.23 in.) | 12.0 mm (0.47 in.) | Part number | E54-CT1 | E54-CT3 |
* Note: If control period is less than 5 seconds, use solid state relay or voltage relay.Detail instruction manual can be supplied if needed. |
